1. It is featured as a locking system between the sheet and the BOLT LESS structure. Each sheet has 4 standardized ribs with a rib height of 39 mm and a total width of 700 mm.

​

2. It is appropriate for slopes of 2 degrees or 1:30. Depending on the length of the sheet and the amount of precipitation that can be supported.

​

3. The purlin must be in a plane where rainwater can be drained without interruption. The optimum purlin spacing should not exceed 1.30 m. However, it depends on the thickness of the metal sheet.

​

4. It is appropriate for a wide range of applications, from medium to large-sized structures.

​

5. It can be SPRUNG CURVED ROOFING. The minimum inverted curvature radius is 50 meters as well as CRIMP CURVED ROOFING as you required.

​

6. The installation system is BOLT LESS without CONNECTOR.