top of page
ST-web-bg-001.jpg

หลังคาบุฉนวนกันความร้อน

PU FOAM

SANGTHAI COOLING ROOF
ST-25-750PU
BOLT TYPE with Thickness 25 mm

2024-ST-01-25-750PU.webp

190-400 บาท/ม

ราคาเริ่มต้น :

เริ่มต้นที่ความหนา 0.30 มม

** ราคามีการเปลี่ยนแปลงตลอดเวลา สามารถสอบถามสาขาใกล้หน้างานทุกครั้ง ก่อนการสั่งซื้อ

Features of Sangthai Cooling Roof ST-25-750PU

1. Each sheet has 5 ribs with a rib height of 25mm and a total width of 750mm.

2. It is appropriate for slopes of 3 degrees or greater. Depending on the length of the sheet and the amount of precipitation that can be supported.

3. There are seams on the ribs and double seams on the ribs to strengthen the curl strength.

4. Sheets can be connected. The joints are tightly joined, and the overlap distance is comparable to that of a standard metal sheet.

5. Cover the PU FOAM insulation with silver, white, and black PVC at a thickness of 25 mm. It can be used as an alternative to ceiling.

 

6. It is appropriate for a wide range of applications, from small to medium-sized structures.

ตารางแสดงข้อมูล Sangthai Cooling Roof
ST-25-750PU

Insulation thickness (PU FOAM +- 5 mm.)

PU FACING

mm

Type

25 mm.

Foil / White PVC / Black PVC

Installation

-

Bolt Type

Screw length (fixing the ridge)

mm.

75 mm.

Transport volume / stack

Sheet

25

Minimum metal sheet thickness

mm.

0.30 mm.

Maximum purlin spacing

m.

1.50 m.

Minimum natural curve radius

m.

50

Note: The data in the table is solely intended as a reference and may alter based on actual usage.

The table below displays the recommended length for the slope angle.
ST-25-750PU

SANGTHAI ROOF
ST-25-750PU

2° C

3° C

4° C

5° C

The maximum length of the metal roof sheet

15

20

25

-

The angle of the roof's slope

Note: The table is just meant to be used as a preliminary information. The slope angle and the quality of the construction must be evaluated prior to installation. Based on actual usage, information may change.

bottom of page